After bathing, many people will find that they have turned off the switch of the shower, but it is still dripping water, making the ground wet and flooding Jinshan. So what’s going on? In fact, there is a phenomenon of water leakage in the shower, and there are many reasons for the phenomenon of water leakage in the shower. How we should solve this problem also has to make corresponding solutions according to different reasons. What is the reason for the shower leak? What should I do if the bathroom shower leaks? Today, the editor is here to explain to you what to do if the bathroom shower leaks, let’s learn about it together!
What is the cause of the shower leaking
There are roughly three reasons why it leaks. The first is that the material itself is not good, such as it is made of waste materials, so the service life is not long. Another reason is that the paint on the surface of the shower is very poor, and the paint will fall off and cause blockage. We can touch the surface with our hands. If the surface is rough and not smooth, it may be a secondary processing product. Another reason is that after a long time of use, the water contains a lot of alkali, and the scale deposits at the water outlet, which leads to the clogging of the shower.
What to do if the bathroom shower leaks 1
If the water is spraying and leaking in the direction of the ball, then we can unscrew the shower head, and then find out if there is an O-ring or other seal inside, and if so, replace it and then Just turn the shower head back to its original position.
What to do if the bathroom shower leaks 2
If there is water leakage at the handle, then we have to consider whether the handle is damaged. We can choose the hose and faucet of the corresponding size and length, replace its rubber ring, and reinstall it, and we need to clean the threads on the handle of the shower head, and apply special adhesive for water pipes or ties around it. Special tape for water pipes. Then turn the shower head back and tighten, then remove excess adhesive and tape.
What to do if the bathroom shower leaks 3
If the blockage is caused by dirt, sand or sediment, we can unscrew it first to remove these stains. For some difficult-to-clean dirt, we can use vinegar to soak the parts if necessary , and scrub the parts, taking care not to scratch them. If the shower head is an adjustable spray type, carefully inspect the parts for signs of excessive wear. If the rotary handle does not move smoothly, or if the internal cam is broken, the entire shower head needs to be replaced.
Editor’s words: If the water flowing out of your shower is uneven, some thick and some thin, then don’t worry, we can rotate the shower head to find the right position and see if the water becomes uniform. If it still doesn’t work, then we need to disassemble the shower head by ourselves, then rinse the shower head with clean water, or brush the shower hole with a toothbrush, and then install and restore it.
