Toilet seat and toilet are not together, they are assembled, so sometimes we can give their own toilet with another smart toilet seat, or replace a new toilet seat, and do not need to buy a whole toilet. The installation and disassembly of the toilet lid are nothing more than these several ways, let’s understand it together.
A variety of toilet cover disassembly diagram
Case 1
At the back of the toilet lid, that is, the root of the toilet lid, there are two round screws to secure the toilet lid. Some will be sealed by the cover, just pick up the lid and remove the screws on it to remove the toilet lid.
Case 2
If the toilet is secured with a retaining bolt, the toilet lid can be removed by removing the retaining bolt on the back of the toilet when replacing it.
Case 3
The part of the bottom of some toilet seats that connects to the toilet is secured with screws, and you can remove the entire lid by reaching to the back of the toilet and finding the screws on both sides to unscrew.
Second, how to install the toilet lid
Material: Toilet lid with a set of accessories, including toilet lid, 2 screws, 2 square latches, 2 sets of nuts
1. First loosen the screws that hold the toilet seat to the lower back of both sides of the toilet, and then remove the old toilet seat.
2. Insert the two screws in the accessories into the square latch first, and then cover the iron shaft on both sides of the toilet seat cover.
3. Align the screws on both sides with the two screw holes at the rear of the toilet, and lock the screws according to the upper and lower positions of the nuts.
Three, how to change the old toilet seat
1. Measure the hole distance of the toilet, that is, the distance between the two holes in the connection of the toilet and the toilet lid
2. Measure the width of the toilet, the distance between the left and right sides of the toilet
3. Measure the length of the toilet, that is, the distance between the hole and the center point and the most front of the toilet
4. Install the screw, then align the nut with the two holes on the toilet, and then install the nut under the toilet
5. Open the toilet seat and try to see if the toilet seat is installed correctly.
