First, what are the sizes of smart toilets
Generally, the height of the toilet is about 70cm, the length is about 70cm, and the minimum is 62cm, but to put a toilet, at least 80*128 space should be set aside 80 for the comfortable size of the legs stretched when the human body sits and squatts. 128 is the minimum size for leaning forward while squatting. The toilet bowl size is generally divided into the length, width and height of the toilet. The length, width and height of the toilet are not the same according to the different sizes of the model, so we must choose the right size of the toilet when purchasing.
Second, what are the precautions for installing a smart toilet
1, the need for calculation before installation, a variety of accurate measurements to ensure that the toilet installation is correct. First of all, the toilet installation master should check the sewage pipe of the toilet to see if there is blockage in the pipe, and also check the level of the ground. If it is not smooth, the ground needs to be levelled first. We also need to make the sewer pipe shorter, but it needs to be at least two centimeters higher than the wall.
2, the toilet in the fixing process, the bottom surface needs to be covered with glass glue. However, the gap between the toilet and the wall needs to be controlled, and the toilet product needs to be straightened. After installation, it is also necessary to see whether the toilet flushes smoothly, whether the switch is normal and so on.
3, need to check the water pipe, flush for a few minutes, so that the pipe can be flushed. In order to ensure the cleanliness of the water pipe, then install the toilet fittings, after installation, connect the water pipe. Then check the tightness, whether the toilet is used normally, and whether the drainage pipe is smooth.
It can be seen that the installation of the smart toilet needs to pay attention to relevant matters, such as the toilet in the fixing process, the bottom surface needs to be covered with glass glue. However, the gap between the toilet and the wall needs to be controlled, and the toilet product needs to be straightened. After installation, it is also necessary to see whether the toilet flushes smoothly, whether the switch is normal and so on.
