Home if you live in the lower floors, or happen to be a little wet weather, is very easy to moisture back. Dampness is serious, in addition to the floor will have moisture, walls, sofas and other furniture will also have water beads, which is very easy to lead to mold, but also affect the service life of furniture. But sometimes, even if it is not back to the south, the home will be back to damp, this time to consider other factors outside the weather.
Reasons why homes are susceptible to moisture may include:
1 If the waterproofing is incomplete, groundwater will spread easily.
2Wall materials or wall construction are not sufficient to absorb moisture.
3 Poor ventilation in the home, no air convection.
4 Poor orientation of the house. If you face south and north, the humidity will be greatly reduced.
5 environmental humidity, such as back to the south, rainy season, etc., rainfall up to, high environmental humidity, it is easy to return to moisture.
Home walls always return to damp how to do on rainy days
1. dehumidification with lime and bamboo charcoal. Put the appropriate lime in a small cloth bag, tie it in a small bag and put it in every corner of the room. Lime itself has the effect of absorbing moisture and can also reduce the humidity in the room. At the same time, lime has a disinfecting effect.
2. If the room is humid, you can use monotonic toner and activated carbon to prevent moisture and absorb it. You can use monotonic and activated carbon. There are many monotonic toners used for moisture prevention and dehumidification in supermarkets, and the most common are the two types of moisture-absorbing boxes and dehumidification bags.
3. Use air conditioners for dehumidification, or buy air humidifiers. Home air conditioners usually have a dehumidification function. However, the method of controlling indoor air humidity through the air conditioner is slow to work. It usually takes two or three hours, which can make the people inside feel cold.
4. The kitchen exhaust fan is often turned on. You can also put baking soda or washing powder in the moisture-prone corners to absorb moisture, and when they clump, they can also be used to wash clothes.
How to deal with mold and dampness in your home
If the walls are moldy and there are black mold spots, you can brush off the spots with a dry toothbrush and then gently wipe them with a soft cloth soaked in alcohol. Alcohol has antiseptic effect, which can make the wall dry and prevent the growth of mold.
On rainy and snowy days, if the house is wet, you can mix with bleach and water in the ratio of 1:20, apply it to the moldy area and wait for the wall to dry. Then sandpaper the wall and apply a layer of waterproof primer and just another layer of latex paint, which can solve the problem of mold on the walls of your house.
