1. Investigate whether the spark of the gas stove is soft and weak, and the discharge frequency is significantly slower than before. If this is the case, it is that our battery is low, and a new battery will solve the problem.
2, the position of the incinerator is too high: the user should be instructed to gently press the incinerator down a few times, and then put on the pot holder.
3, if the spark sound is loud and powerful, but it does not ignite, then consider whether the gas channel flow, it is likely that the nozzle in the furnace head is blocked during the use of the burner, take off the fire distribution cover with a thin wire through the nozzle hole, and then put back the fire distribution cover to re-burn.
4, the flame is too weak to reach the furnace head, the gas pressure is too low, the user of the liquefied gas stove suggests that it replace the new pressure reducing valve, coal gas and natural gas should be reflected to the gas supply company.
5, nozzle blockage, screw off the nozzle clean;
6. The burner fire cover fire hole is blocked by dirt, preventing the burner from flowing out of gas inclusion, and sorting out the fire hole dirt;
7, the rubber hose broken flat ventilation blocked, straighten the rubber hose;
8, the regulator inlet and nozzle are blocked by rust, blocking the gas flow in the cylinder body, replace the regulator;
9, pipeline blockage, this is a very common problem, once the pipeline is blocked, it is necessary to check the gas valve, as usual can smell the smell of coal and the stove can not catch fire is likely to be gas blockage. The gas stove pipe is blocked, then the pipe should be dredged or replaced.
