The faucet occupies the first place in the bathroom. Without the faucet, the bathroom will immediately fall into a paralyzed state. The installation of the faucet is very simple. You don’t need to find a maintenance company for help every time. Today, the editor will popularize the installation process of the basin faucet. What is it? Let yourself be able to install the faucet too.
The specific process of basin faucet installation is divided into the following steps:
Step 1: Take out the faucet and check whether all the accessories are complete. Before installation, be sure to remove the dirt around the installation hole and in the water supply pipe to ensure that there are no impurities in the water inlet pipe. To protect the surface of the faucet from being scratched, it is recommended to wear gloves for installation.
Step 2: Take out the rubber gasket, which is used to relieve the pressure of the metal surface of the faucet in contact with the ceramic basin, protect the ceramic basin, then insert a water inlet pipe, and tighten it.
Step 3: Thread the threaded joint into the first water inlet hose, and then pass the water inlet end of the second water inlet hose through the threaded joint.
Step 4: Screw the second water inlet hose into the water inlet port, pay attention to the correct direction and balance the force, and then tighten the threaded joint.
Step 5: Insert the two water inlet hoses into the white rubber pad.
Step 6: Put on the lock nut to fix the faucet.
Step Seven: Then tighten the sleeve.
Step 8: Lock the two water inlet pipes and the angle valve joints separately. Do not use pipe wrench to twist them hard to prevent deformation or even breaking. Pay attention to the connection of hot and cold water. Connect the other end of the water inlet pipe to the water outlet angle valve.
After reading the introduction of the specific process of the installation of the basin faucet by the editor above, are you secretly happy that you have also mastered the installation process of the faucet, and you don’t need to ask the maintenance company to help you waste money, and you can install the faucet by yourself?
