Washing machine in the use of the process often encounter some failure, which is not good dehydration effect is more common, and sometimes the washing machine is not even dehydration, in order to let you enjoy a better laundry experience, today we will briefly introduce the small swan washing machine does not dehydration is what causes? How to dehydrate with noise? Let’s take a look!
Small swan washing machine does not dehydration is what causes
1, clothing imbalance: when the washing can not be adjusted to balance, the washing machine will automatically set a low speed, the dehydration effect in this speed will be slightly worse.
2, the top cover of the switch is damaged, washing machine in dehydration because it is high-speed action, not allowed to open the top cover, so there is a linkage switch on the top cover, once the cover is opened circuit is automatically broken. If it is damaged dehydration will not move!
3, clothing texture: the more absorbent washing recommended the use of high-speed dehydration (some high-end clothing can not choose high-speed dehydration).
4、The drainage system is blocked. The washing liquid in the water cylinder can not be discharged, or too much foam in the water cylinder, the washing liquid in the cylinder is difficult to drain for a while, the water level switch can not be reset, the washing machine can not enter the dehydration program.
5、The water level switch cannot be reset. The washing machine dehydration program is started under the condition that the water level switch is reset after the washing liquid is drained. If the drainage water level switch is damaged, dehydration is a procedure that needs to be carried out after the drainage is finished, and if the water level switch is damaged, it will not be able to enter the dehydration program!
6, the computer control board failure! Can only be replaced, because its control board in order to waterproof is covered with rubber, repair is quite inconvenient.
Xiaotian Swan automatic washing machine fault repair
A, small swan automatic washing machine dehydration with noise
First of all, check whether the barrel of clothing placed on one side, put away dehydration shaking powerful noise, at this time should open the cover, the clothing placed evenly. The same method as washing noise check whether there is a foreign body between the inner barrel, wheel and outer barrel, if there is removed foreign body, may be the drain valve on the adjusting rod nut loose or wear, resulting in open distance is not enough, so that the clutch pawl and ratchet rotation phase rub caused by the noise, at this time should adjust the position of the adjusting rod.
Second, Xiaotian Swan automatic washing machine dehydration vibration large
1, there are four handling screws behind the drum washing machine, sent home to their own attention to remove.
2, then the washing machine to be placed on a smooth ground, the following four adjustable screw feet to adjust themselves, the washing machine is stable, washing clothes dumping time will not dance again.
3, dehydration, the body of the machine issued a “bang bang” sound. The fault is mostly a collision between the laundry drum and the shell or the washing machine is placed on the ground is not flat or the four bottom feet do not maintain good contact with the ground.
What is the reason for the Xiaotian Swan washing machine is not dehydrated is introduced here, I hope it will help you.
