Over time, various problems can develop in the bathroom, such as water leakage. In response to this situation, people usually choose to smash bricks for repair. However, this method is not only time-consuming and laborious, but also causes certain damage. Therefore, brick-free waterproofing has become a more ideal solution. This article will introduce in detail how to carry out waterproof operation without smashing bricks.
–The working principle of brick-free waterproofing
Smash-free brick waterproof coating is a product that can form a strong waterproof layer on the surface of brick walls. This product uses advanced technology to achieve waterproof effect without damaging the brick wall.
–Operation steps for brick-free waterproofing
First of all, it is necessary to comprehensively clean the bathroom floor to remove accumulated water and impurities. On this basis, use a hair dryer to dry the ground to ensure that the ground is completely dry.
Next, you need to prepare the brick-free waterproof paint, as well as brushes and rollers. After mixing the paint, first use a brush to treat the corners and seams, and then use a roller to evenly apply waterproof paint on the ground and walls. During the application process, it should be ensured that the paint can fully penetrate into the brick joints to enhance the waterproof effect.
After applying, you need to wait for the paint to dry completely. This process may take 24 to 48 hours, depending on coating thickness and ambient humidity. During this period, avoid other activities in the bathroom to prevent damage to the waterproof layer.
Finally, in order to ensure the waterproof effect, a second coat is required. This coating should be done after the first coating is completely dry, and the operation method is the same as that of the first coating. The waterproof layer after two coats can greatly enhance the waterproof performance of the bathroom.
–Precautions for avoiding smashing bricks and waterproofing
Brick-free waterproofing is a simple, quick and effective bathroom waterproofing method. It can not only avoid unnecessary losses caused by smashing bricks, but also solve the problem of toilet water leakage in a short time. Therefore, if there is water leakage in the bathroom, you may wish to consider using brick-free waterproof paint for repair.
During the operation, it should be noted that the ground must be kept clean and dry. At the same time, when applying waterproof paint, try to ensure that the paint is even and complete, so as to ensure the best waterproof effect. At the same time, after the application is completed, giving enough drying time is also the key to ensuring the waterproof effect.
In the actual operation process, if you encounter any problems, you must seek professional help in time to ensure the smooth progress of the waterproof work.
