Due to the long-term water flow of the shower we use, there will be a certain amount of scale and impurities inside the shower. Then we have to learn how to maintain the shower. Let’s take a look at how to maintain the shower and the correct way to maintain the shower.
How to maintain the shower
1. Scale removal: every six months or less, remove the shower head and place it in a small basin, water the surface and inside of the shower head with edible white vinegar and soak for 4-6 hours, then wipe it gently with a cotton rag Spout on the surface of the shower: After reinstalling the connector, let the water flow for a while, and wait for the white vinegar and scale to flow out with the water, so as to eliminate or reduce the impact of the scale on the shower, and have a certain bactericidal effect.
2、水龙头电镀面的保养：经常用软布沾少许面粉擦拭花洒电镀面，然后用清水冲洗，即可使花洒表面光亮如新。
Precautions: ①. Please pay attention to yourself and the safety of the product when disassembling and assembling the shower; ②. Filter gaskets cannot be used if the mesh is too large or too fine. Flow rate, the size of the filter screen is preferably 40-60 mesh.
3、除垢时请勿使用强酸，以免对花洒表面造成腐蚀。
4. Do not disassemble the shower for maintenance by yourself. Improper disassembly will damage the appearance and internal structure of the product.
5. The ambient temperature of the shower should not exceed 70°C. High temperature and ultraviolet light will greatly accelerate the aging of the shower head and shorten the service life of the shower head, so the installation of the shower head should be as far away as possible from heat sources such as Yuba and other electrical appliances. The shower cannot be installed directly under the Yuba, and the distance should be more than 60CM.
After reading the brief introduction of the editor, everyone has a certain understanding of how to maintain the shower head and the correct method of maintaining the shower head. I hope it will be helpful to everyone.
.
