Associates who have a history of decoration are often ruined by decoration. In the home decoration, many people because of the decoration process of many links, long construction period and induction of physical and mental fatigue. What is more depressing is that some decoration companies or construction staff will cut corners or prevarication on departmental projects, which will greatly reduce the quality of decoration. This paper reveals the common means of cutting corners in various decoration links, hoping to help consumers understand the decoration procedure and prevent losses. So, where in the decoration will cut corners, shoddy good?
1, water pipe
Have the construction experience of the accomplice, is it not touched such a situation: the construction is completed, the outside looks like the renovation project is no problem, fully in line with their own requirements, but once the acceptance is completed, but found that the kitchen and bathroom water is not smooth? Indeed, this is in the project, the construction team caused by cutting corners, in order to save trouble, a small number of construction teams may contain a lot of cement, sand concrete fragments directly into the sewer, so that the future of the sewer pipe is not smooth.
Be sure to strictly monitor and warn the construction team in advance that the waterway cannot be used as a garbage chute. After the construction of the waterway is completed, all the basins, basins and bathtubs are filled with water to see whether the water is smooth and whether the pipeline has leakage problems. After completing all these steps, it can be counted as passing the acceptance.
2, wire discussion
Signs: This is a very strong hidden jerking, usually occurs after the completion of the renovation of a period of time, in the consumer use of electrical appliances, especially some large power consumption of water heaters, air conditioners, etc., switches, sockets fever or even destruction, some consumers do not have a history of this moment often think that high-power electrical appliances caused trouble, the fact is not Yunyun, This situation is likely to be caused by electricians not wiring according to construction requirements when installing sockets, switches and lamps.
Reminder: The future is coming, high-power electrical appliances: the use of air conditioning is inevitable, so that in the construction must monitor the electrician strict construction according to the operating procedures, after all switches and sockets are installed, must be held realistic use, to see if these parts have fever signs, in order to prevent unnecessary losses in the future use of electrical appliances.
3, wall paint
Latex paint is now the most common wall decoration materials, in the detailed construction can be held brushing, roller coating or spraying, for the interior wall decoration of the room, as usual latex paint needs to be painted more than two times to pass. If the workers are not serious or prevaricated during construction, there will often be poor transition, especially if the color is darker, this problem will arise.
Before using the latex paint, you need to add a certain amount of water, and the prepared latex paint should be used up at one time. Uniform color paint is also best applied at one time. If the wall needs to be repaired after the construction is completed, the entire wall should be painted again.
4, wall tile paving
Signs: The laying of wall tiles is a skilled thing. If the workers cut corners, it is easy to empty tile, uneven seam and other problems, not only let the overall elegant level of the room is greatly reduced, and after a long time, the tile is easy to crack, broken and other signs. In addition, the cement and adhesive used for laying ceramic tiles are also stressed, if the ratio is not reasonable, it will also fall off and other problems.
Reminder: wall tile paving should be smooth and reliable, clear pattern, no dirt and pulp marks, the outside color is basically the same, the joint average, the plate without cracks, falling corners and missing edges, the local hollow drum must not exceed 5% of the total.
5, wall cleaning slot
Signs: Now the family decoration is usually choose to bury the pipeline, in order to keep the living environment refined and safe, and to bury the pipeline, it must be in the wall and the ground after the slot buried. The brutal construction of a few workers during the slotting operation will not only damage the load-bearing structure, but also may cause damage to other pipelines around.
Reminder: Before construction, it is necessary to reconfirm the direction and position of the pipeline with the construction captain. For the rest of the wall structure, the requirements for grooving are also different: the load-bearing wall in the balance is not allowed to be grooving, and the wall with insulation layer is easy to cause cracking outside after grooving, and the ground grooving, but also be careful not to damage the floor, causing poverty to the downstairs residents.
6, seam decoration
Signs: In some of the walls and doors, Windows, and two different color paint docking places, because it is not easy to be noticed, so that these places are also workers often prevarication. You will often see paint mixed between latex paint and wood work, and problems arise at the joints.
Reminder: For the disposal of joints is very important, you must control the workers seriously construction. If there are two colors of paint on the wall, in the construction must be taped at the edge of the first color, and then brush another color of paint on it, so that as long as the tape is torn off after the completion of construction, the entire joint can be abnormally neat.
7, the wire through the tube
Signs: In the construction of home decoration, almost all wires are worn in PVC pipes and buried in the walls. Therefore, after the wire is pierced into the PVC pipe, consumers can’t basically see it, and there is no way to talk about acceptance. If the worker is not serious in the operation, it will cause the wire to kink in the tube, causing hidden dangers of electricity. If the worker intends to cut corners, he will use a wire with discussion or several wires will be threaded in a unified PVC pipe, once the problem occurs, the replacement is also difficult.
Reminder: It is best for consumers to purchase wires themselves, and then control workers at the site to operate, and hold power training after installation. In addition, consumers must let the decoration company leave a “pipeline diagram”. When the electrician has just buried the wire into the wall, you can put a number on these walls and draw a plan, and then draw the direction and detailed position of the wire with a pen, indicating the position of the upper floor, the lower ground and the similar wall, and indicating the discussion position of the pipeline, so that once the fault occurs, you can find the line position immediately.
8, small side disposal
Signs: The so-called “small surface” is a small place that some consumers cannot see and do not pay much attention to, such as the upper edge of the door, the bottom of the window sill board, etc., some workers will cut corners here, and even do not do any management there.
Reminder: Always remember that any object has 6 planes, and do not overlook any detail when honing the quality of the project.
9. Base disposal
Signs: Before painting latex paint, paving tile, be sure to do a good job of the wall or ground base disposal, for the new house, the base disposal usually only need to be polished with coarse sandpaper, do not need to remove the original paint layer, and the wall of the popular old house needs to remove the original paint before the next process can be held. Some workers, it is due to the owners of this knowledge does not understand, in the construction of corners in this area, so that the result is light caused by uneven walls, latex paint paint after the color difference, heavy latex paint discoloration, cracks and even peeling, or tile paste is not strong signs.
Reminder: In the paving construction of wall and floor tiles, you should pay attention to the tiles can not be directly laid on the outside of lime mortar, stone plaster, paper bar stone plaster, hemp lime paste and latex paint, but to clean the bottom layer can be laid. The adhesive paste used between the tile and the base should be deployed strictly according to the construction scale and proportion, and the use of designated cement and adhesive material can not be deployed at will. When applying latex paint, you must pay attention to whether the scraping of the wall putty is average and smooth, and whether the grinding and rolling coating are in place. In addition, you should pay attention to whether the ratio of latex paint is suitable, and whether there is too much water added.
10. Ground leveling
Signs: In some projects suspected of cutting corners, it is often found that there are signs of warping at the edge of the wood floor at home, especially near the corner of the wall, which is more significant, what is the cause of such a problem? One of the main causes of warped wood floors is due to problems with ground leveling before laying. Because some Hengyu ground is not smooth enough, so before laying the floor needs to be re-levelled, if the workers are not careful enough or intentionally shoddy, it will cause the problem of “more uneven”, to the future of the floor up hidden dangers.
Reminder: Before holding the ground leveling, it is necessary to do the base disposal of the ground first, and then hold the ground leveling with cement mortar. After the cement is dry, use a special level to determine the flatness of the entire ground, and then proceed to the next step of construction.
Associates who have a history of decoration are often ruined by decoration. In the home decoration, many people because of the decoration process of many links, long construction period and induction of physical and mental fatigue. What is more depressing is that some decoration companies or construction staff will cut corners or prevarication on departmental projects, which will greatly reduce the quality of decoration. This paper reveals the common means of cutting corners in various decoration links, hoping to help consumers understand the decoration procedure and prevent losses. So, where in the decoration will cut corners, shoddy good?
1, water pipe
Have the construction experience of the accomplice, is it not touched such a situation: the construction is completed, the outside looks like the renovation project is no problem, fully in line with their own requirements, but once the acceptance is completed, but found that the kitchen and bathroom water is not smooth? Indeed, this is in the project, the construction team caused by cutting corners, in order to save trouble, a small number of construction teams may contain a lot of cement, sand concrete fragments directly into the sewer, so that the future of the sewer pipe is not smooth.
Be sure to strictly monitor and warn the construction team in advance that the waterway cannot be used as a garbage chute. After the construction of the waterway is completed, all the basins, basins and bathtubs are filled with water to see whether the water is smooth and whether the pipeline has leakage problems. After completing all these steps, it can be counted as passing the acceptance.
2, wire discussion
Signs: This is a very strong hidden jerking, usually occurs after the completion of the renovation of a period of time, in the consumer use of electrical appliances, especially some large power consumption of water heaters, air conditioners, etc., switches, sockets fever or even destruction, some consumers do not have a history of this moment often think that high-power electrical appliances caused trouble, the fact is not Yunyun, This situation is likely to be caused by electricians not wiring according to construction requirements when installing sockets, switches and lamps.
Reminder: The future is coming, high-power electrical appliances: the use of air conditioning is inevitable, so that in the construction must monitor the electrician strict construction according to the operating procedures, after all switches and sockets are installed, must be held realistic use, to see if these parts have fever signs, in order to prevent unnecessary losses in the future use of electrical appliances.
3, wall paint
Latex paint is now the most common wall decoration materials, in the detailed construction can be held brushing, roller coating or spraying, for the interior wall decoration of the room, as usual latex paint needs to be painted more than two times to pass. If the workers are not serious or prevaricated during construction, there will often be poor transition, especially if the color is darker, this problem will arise.
Before using the latex paint, you need to add a certain amount of water, and the prepared latex paint should be used up at one time. Uniform color paint is also best applied at one time. If the wall needs to be repaired after the construction is completed, the entire wall should be painted again.
4, wall tile paving
Signs: The laying of wall tiles is a skilled thing. If the workers cut corners, it is easy to empty tile, uneven seam and other problems, not only let the overall elegant level of the room is greatly reduced, and after a long time, the tile is easy to crack, broken and other signs. In addition, the cement and adhesive used for laying ceramic tiles are also stressed, if the ratio is not reasonable, it will also fall off and other problems.
Reminder: wall tile paving should be smooth and reliable, clear pattern, no dirt and pulp marks, the outside color is basically the same, the joint average, the plate without cracks, falling corners and missing edges, the local hollow drum must not exceed 5% of the total.
5, wall cleaning slot
Signs: Now the family decoration is usually choose to bury the pipeline, in order to keep the living environment refined and safe, and to bury the pipeline, it must be in the wall and the ground after the slot buried. The brutal construction of a few workers during the slotting operation will not only damage the load-bearing structure, but also may cause damage to other pipelines around.
Reminder: Before construction, it is necessary to reconfirm the direction and position of the pipeline with the construction captain. For the rest of the wall structure, the requirements for grooving are also different: the load-bearing wall in the balance is not allowed to be grooving, and the wall with insulation layer is easy to cause cracking outside after grooving, and the ground grooving, but also be careful not to damage the floor, causing poverty to the downstairs residents.
6, seam decoration
Signs: In some of the walls and doors, Windows, and two different color paint docking places, because it is not easy to be noticed, so that these places are also workers often prevarication. You will often see paint mixed between latex paint and wood work, and problems arise at the joints.
Reminder: For the disposal of joints is very important, you must control the workers seriously construction. If there are two colors of paint on the wall, in the construction must be taped at the edge of the first color, and then brush another color of paint on it, so that as long as the tape is torn off after the completion of construction, the entire joint can be abnormally neat.
7, the wire through the tube
Signs: In the construction of home decoration, almost all wires are worn in PVC pipes and buried in the walls. Therefore, after the wire is pierced into the PVC pipe, consumers can’t basically see it, and there is no way to talk about acceptance. If the worker is not serious in the operation, it will cause the wire to kink in the tube, causing hidden dangers of electricity. If the worker intends to cut corners, he will use a wire with discussion or several wires will be threaded in a unified PVC pipe, once the problem occurs, the replacement is also difficult.
Reminder: It is best for consumers to purchase wires themselves, and then control workers at the site to operate, and hold power training after installation. In addition, consumers must let the decoration company leave a “pipeline diagram”. When the electrician has just buried the wire into the wall, you can put a number on these walls and draw a plan, and then draw the direction and detailed position of the wire with a pen, indicating the position of the upper floor, the lower ground and the similar wall, and indicating the discussion position of the pipeline, so that once the fault occurs, you can find the line position immediately.
8, small side disposal
Signs: The so-called “small surface” is a small place that some consumers cannot see and do not pay much attention to, such as the upper edge of the door, the bottom of the window sill board, etc., some workers will cut corners here, and even do not do any management there.
Reminder: Always remember that any object has 6 planes, and do not overlook any detail when honing the quality of the project.
9. Base disposal
Signs: Before painting latex paint, paving tile, be sure to do a good job of the wall or ground base disposal, for the new house, the base disposal usually only need to be polished with coarse sandpaper, do not need to remove the original paint layer, and the wall of the popular old house needs to remove the original paint before the next process can be held. Some workers, it is due to the owners of this knowledge does not understand, in the construction of corners in this area, so that the result is light caused by uneven walls, latex paint paint after the color difference, heavy latex paint discoloration, cracks and even peeling, or tile paste is not strong signs.
Reminder: In the paving construction of wall and floor tiles, you should pay attention to the tiles can not be directly laid on the outside of lime mortar, stone plaster, paper bar stone plaster, hemp lime paste and latex paint, but to clean the bottom layer can be laid. The adhesive paste used between the tile and the base should be deployed strictly according to the construction scale and proportion, and the use of designated cement and adhesive material can not be deployed at will. When applying latex paint, you must pay attention to whether the scraping of the wall putty is average and smooth, and whether the grinding and rolling coating are in place. In addition, you should pay attention to whether the ratio of latex paint is suitable, and whether there is too much water added.
10. Ground leveling
Signs: In some projects suspected of cutting corners, it is often found that there are signs of warping at the edge of the wood floor at home, especially near the corner of the wall, which is more significant, what is the cause of such a problem? One of the main causes of warped wood floors is due to problems with ground leveling before laying. Because some Hengyu ground is not smooth enough, so before laying the floor needs to be re-levelled, if the workers are not careful enough or intentionally shoddy, it will cause the problem of “more uneven”, to the future of the floor up hidden dangers.
Reminder: Before holding the ground leveling, it is necessary to do the base disposal of the ground first, and then hold the ground leveling with cement mortar. After the cement is dry, use a special level to determine the flatness of the entire ground, and then proceed to the next step of construction.
