With the progress of society and the improvement of people’s living standards, the shower is now an indispensable bath appliance in our daily life. If the shower head is damaged and needs to be replaced, how to install the purchased shower head? Here we will introduce the precautions for the installation of shower showers.
Installation method of shower head
1, in the water mixing valve and shower lift rod comparison, use a ruler to measure the installation hole, and then use a black pen to trace the hole distance size.
2. Drill the hole with the drilling machine according to the size described before, and install the S-shaped joint, which can adjust the direction to facilitate the connection with the shower faucet. The joint should be wrapped with raw tape, and the number of laps should not be less than 30 laps, which can prevent water leakage. Install shower lift seat and eccentric, and then cover the decorative cover.
3. Install the whole support of the shower head, take out the shower head, put the foot pad into the nut, and then connect it with the S-bend connector, and tighten the nut fully with a wrench. Use a level to measure whether the faucet is installed level.
4. Connect the stainless steel hose of the small shower with the transfer switch, and fix the other end of the hose with the small shower by hand.
5. Link the top spray to the top of the support and fix it with a wrench.
The above is the relevant introduction we have brought to you today, I believe that friends have a certain understanding, I hope this article can help you. You can also log in to the Fuwu home network to view and subscribe more related content and information.
296 likes
