1. Evenly apply toothpaste on the outside of the tile tape and wipe it off with a soft rag after 5 minutes. For tiles with more tape traces, you can apply toothpaste twice to remove them. The principle is that toothpaste contains glycerin, which is a superior solvent and can dissolve the factor of self-adhesive. Many MM cosmetics also contain essential oils, which can also be used to remove tile tape traces.
2. First tear off the adhesive decorations attached to the outside of the tile, wet the towel with warm water, and wipe the adhesive marks frequently twice; Then use a warm wet towel to soap, in the marks frequently wipe several times; Finally, wipe off the soap foam with a clean, warm wet towel, and the adhesive traces are removed
3, again: Use a pen and paper knife to scrape, suitable for glass, floor tiles and other hard bottom; Rub with alcohol, suitable for glass, floor tiles, clothing, etc.; Freeze, self-adhesive after freezing hard, can be directly torn off, suitable for not using alcohol, scraping and other ways.
4, the effect of wind oil can also be. If it is a self-adhesive sticker and the like, you can also use a hair dryer to blow hot and remove it very well, but it is not suitable for plastic, overheated plastic will be deformed.
5, with the wind blower hot blowing, this effect is very good, at home also convenient for everyone basically has a wind blower, whether it is for sticker glass, plastic, wood, metal can be, first with the wind blower hot blowing a few times, and then tear a small side, along the tear of the bias side gradually tear with the wind blower hot blowing, the effect is very good.
6, refreshing to buy a bottle of self-adhesive remover, easy to use!
