The surface of epoxy resin is covered by a layer of paint, so many people have doubts about this safety, and the use of epoxy resin is very extensive in life, although there are many advantages of epoxy resin, but there are certain disadvantages. Next, we will introduce whether epoxy resin is toxic and how to remove epoxy resin glue.
Is epoxy toxic
Epoxy resin itself has no toxicity, it is a non-toxic product, but when used, a curing agent is added inside, and this curing agent will be some toxic, but the toxicity is relatively low. In addition, the epoxy resin formula system is very complex, involves more things, in the processing, production and use of strict operating procedures, do a good job of protection is fundamental.
How to remove epoxy glue
1, before curing: you can use acetone or alcohol to wipe the contaminated surface.
2, after curing is soft: for this case, you can use a utility knife, little by little to remove.
3, after curing is hard: for this case, you can bake at high temperature, soften, this time with gloves, take out in the oven while hot, with a box cutter little by little to remove.
4, if the use of contact with the skin, should be immediately washed with a lot of water and soap.
5, this product is solvent-based, irritating to the skin. In order to avoid inhalation contact with the skin, ventilation and protective gloves, masks and eyewear should be worn during operation.
Method of use of epoxy resin adhesive
1. Pour the epoxy resin glue into the container when used, and add water cover in the epoxy resin glue for fire prevention and volatilization. The parts with the adhesive layer removed are completely immersed in the degumming agent, and the adhesive layer and adhesive potting material will be automatically removed. After removal, it can be rinsed with water.
2. After the use of epoxy resin adhesive, the removed resin can be filtered by filter net and can be continued to be used many times.
3, can be used to brush on the need to remove the rubber layer parts, tens of minutes after the rubber film bulge, off after it can be washed, for thick film of the rubber layer can be painted several times.
