How about a Wrigley basin faucet
1. Select the material
Wrigley faucets are basically made of all copper or stainless steel materials, processed by special processes, and have excellent quality.
2, excellent spool
The spool is an important part that determines the service life of the faucet. The spool of Wrigley faucets is generally made of ceramic. Because the sealing of the ceramic spool is good, even if the faucet is repeatedly switched on and off at a high frequency, there will be no leakage phenomenon, which is very suitable for family use.
3. Good handle
The handle of the faucet mainly has spiral type, single handle, double handle, and 90° switch. When consumers buy faucets, they must ask whether there is a bubbler. Under normal circumstances, Wrigley faucets are equipped with bubblers, which can effectively prevent water from splashing around.
Two, Wrigley basin faucet how to install
1、取出面盆龙头，检查所有配件是否齐全，安装前务必清除安装孔及进水管周围的污垢，确保面盆龙头进水管内无杂质。为保护龙头表面不被划伤，建议安装时戴上手套。
2、取出面盆水龙头的橡胶垫圈，垫圈用来缓解水龙头金属面与陶瓷盆的接触压力，保护陶瓷盆，然后插入进水管，并拧紧。
3. 将螺纹连接器拧入第一根进水软管，然后将第二根进水软管的入口端穿过螺纹连接器。
4、将第二根进水软管旋入进水口，注意方向正确，用力平衡，再旋上螺纹接头。
5. 将两根进水软管穿入白色橡胶垫。
6、套上锁紧螺母，固定水龙头。
7.然后拧紧套管。
8、分别锁紧两根进水管与角阀接口，不可用管钳扭动板子，以防变形甚至折断，注意冷热水连接，将进水管的另一端接在出水角阀上。
It can be seen that the installation of Wrigley basin faucet must pay attention to the steps and methods, such as being sure to remove the dirt around the installation hole and in the water supply pipeline before installation, and ensure that there are no impurities in the basin faucet inlet pipe. To protect the surface of the faucet from scratches, it is recommended to wear gloves when installing.
