1. How much can the toilet shifter move?
What is a toilet lifter? In fact, the toilet shifter is a kind of pipe fitting, if the bathroom wall and sewage pipe mouth has been fixed, and the sewage mouth of the bought toilet and the sewage pipe mouth of the toilet can not be connected, this pipe fitting will be used, and only the use of this pipe fitting can make the two docking.
What about the function of the toilet lift? Because the size of the toilet shifter is 5CM, 10CM, 15CM, it is recommended not to exceed 10CM of the toilet shifter, more than 10cm of the toilet shifter will affect the flushing effect. The installation of the toilet shifter must be elevated on the floor (generally 20CM high), the drainage pipe, the pipe must have a certain slope, but the distance can not be too long, the distance is long, the slope of the pipe must be larger, the ground will increase, and the flushing effect will also be affected. The row pipe can be connected to the original pit, or it can be connected to the water main. Conditionally installed toilet shifter can choose wall drainage toilet, as long as a short wall, direct pipe to the sewer main.
In the current building materials market, usually the size of the toilet shifter is a standard size, if improperly installed, resulting in the upper and lower interfaces and the center can not be connected, it may bury hidden dangers for the future, causing a small obstacle to the toilet and sewage pipe blockage. Therefore, the toilet shifter is generally installed in the pit distance is too long or too short, and the displacement distance can not exceed 10MM, and the toilet shifter must be installed after the floor tile is affixed. That’s one of the things toilet lifters do.
Second, how to install the toilet shifter?
The first step of installing the toilet shifter: In the current building materials market, usually the size of the toilet shifter is a standard size, if improperly installed, resulting in the upper and lower interfaces and the center can not be connected, it may bury hidden dangers for the future, causing a small obstacle to the toilet and sewage pipe blockage. Therefore, the toilet shifter is generally installed in the pit distance is too long or too short, and the displacement distance can not exceed 10MM, and the toilet shifter must be installed after the floor tile is affixed.
The second step of installing a toilet lifter: The toilet will be more easily blocked than before, and the use of the toilet shifter, the bend of the sewage pipe will be more than before, the air pressure in the pipe will increase, it is easy to cause sewage backflow, and the flushing function of the toilet can not be fully played, so unless necessary, do not install the toilet shifter, if you have to install the toilet shifter, the distance connected should not be too long.
The third step of installing the toilet shifter: The greater the distance the toilet shifter generally shifts, the greater the slope. Therefore, the installation of the shifter should be in front of the floor tile, some should plane the ground down or pad the high ground, and some of the shifter ground pad is not much, but the horizontal drainage place is relatively narrow (the general channel is flat). But it is only 5 centimeters, it is not relevant, the ground under the water mouth is 10 centimeters, which is equal to staggered half the mouth.
I believe that through the simple introduction of the toilet shifter today, we have a more comprehensive understanding of the toilet shifter. Then in the installation of the toilet shifter, you can refer to the steps described above, I believe that this can help you understand the toilet shifter faster and better.
