一、浴缸的材质有哪些
1. Cast iron
Cast iron bathtub is made of cast iron and coated with enamel, so the weight is very large and it is not easy to produce noise when used. Because the casting process is more complex, the cast iron bathtub is generally a single shape and the price is very expensive.
2. Acrylic
Made of organic materials, rich shape, light weight and smooth surface, will not rust erosion, due to slow heat conduction, so it can maintain water temperature for a long time, is currently the mainstream product on the market. However, the acrylic bathtub has poor pressure resistance, is easy to be scratched by hard objects, and is also prone to yellow aging after a long time of use.
3. Steel plate
Is the traditional material of manufacturing bathtub, steel cylinder is made of the whole thickness of about 2 mm bathtub special steel plate by stamping molding, the surface is then made of enamel treatment, it has wear-resistant, heat resistant, pressure resistance and other characteristics, weight between cast iron cylinder and acrylic cylinder, insulation effect is lower than cast iron cylinder, but the service life is long, the overall cost performance is higher.
4.木材
Made of solid wood, the surface will be brushed with a layer of tung oil, to prevent the effect of water seepage. The wooden bathtub is natural and environmentally friendly, especially suitable for soaking medicinal bath, and has excellent thermal insulation, lightweight, no installation, and it is convenient to move.
Second, precautions for installing the bathtub
1, to check whether the front and back of the bathtub is smooth, drainage facilities are suitable, installation of sewage facilities to take anti-blocking facilities and anti-bump, whether it will cause damage to the glaze, affecting the beauty of the bathtub.
2, for the bathtub with bracket, check whether the bathtub is placed on the ground is smooth; To reserve space for the tub, use a level and adjust the support nut until the tub is level.
3, do not destroy the waterproof layer. Has been damaged or no waterproof layer, to be waterproof first, and after 12 hours of water leakage test.
4, the height of various bathtub cold, hot water faucets or mixed faucets should be 150mm higher than the surface of the bathtub. The chrome-plated layer should not be damaged during installation, and the chrome-plated cover should be close to the wall.
The above is the introduction of the bathtub material and installation precautions, you can refer to the hanging ditch river installation.
