First, shower cleaning skills
1. Manually clean the shower head. Remove the screen cover or other parts that absorb scale from the shower head in the bathroom, clean it with a brush, and then reinstall it. Some brands of showers are equipped with special shower head opening tools when they are sold, which is convenient for consumers to use.
2, hand wipe cleaning shower. The water outlet hole of this kind of bathroom shower shower is designed with rubber particles. The rubber material feels soft and comfortable, and it is not easy to scale. It is easy to clean, and the scale can be easily crushed and ejected by gently rubbing the rubber particles with your fingers. This cleaning method makes good use of the characteristics of the material and is now a more popular cleaning method on the market.
3, automatic cleaning shower. Due to the special structure of a certain type of bathroom shower head, the scale will be automatically cleaned out during use. For example, there is a cleaning needle inside some shower head, and when the water is converted, the cleaning needle will automatically pop out and bring out the scale.
二、花洒如何安装
1, we first find the “eccentric joint” from the product package, that is, both ends are threaded and look a little misplaced copper joint. Wrap them with raw material tape, and then connect them to the embedded outlet pipe connector. In the installation, it is necessary to pay attention to the use of eccentric joints to adjust the direct distance of the water outlet on the wall to be controlled at about 15cm. And the height of the shower from the ground position about 90~100cm is appropriate.
2. Assemble the main body of the faucet and the main outlet pipe, and use raw material belt to wrap the thread before connection. Then put the installed main shower faucet in the front outlet position for docking. Draw a line on the wall first where the middle of the shower rod needs to be fixed with screws, so as to facilitate the positioning and installation of the fixed base. Drill holes in the position of the shower holder and insert nylon anchors, and then use screws to secure the holder to the wall.
3, the shower rod and faucet combination installed to the eccentric joint fixed seat, if the position is not on, you can adjust the eccentric joint box fixed seat to make some appropriate adjustments. At the time of installation, it is necessary to pay attention to the installation of sealing gaskets between the nut behind the faucet and the eccentric joint.
4, after the installation of the faucet, we will install the shower top spray on the position of the bend pipe at the top of the shower rod to ensure the connection is stable, and use stainless steel hose to connect the main body of the faucet and the hand-held shower. After completion, you can try it to see if there is any leakage. Make sure there are no leaks and the installation is complete.
After the above introduction, everyone knows how to install the shower head? After using the shower for a period of time, remember to clean the shower to avoid the accumulation of scale affecting the water of the shower.
