水龙头漏水怎么办？第一步毫无疑问是关好家里的“水闸”，然后再看看各种原因导致漏水的修复方法。
第 1 类：轴损坏
如果水龙头漏水，首先要弄清楚问题的原因是什么，如果要修理水龙头，一定要了解真正的原因。
If the shaft pad of the faucet is worn out for a long time, you can directly use a pair of pliers to clamp the gland bolt of the faucet tightly, turn it counterclockwise until it is loosened and remove it, and then directly take out the worn shaft. Gasket, and then replace the prepared new shaft gasket, then clamp it tightly with pliers, and tighten the gland bolt in a clockwise direction to restore the leaking faucet to normal use!
第二种：止水带破损
Use a wrench to turn the faucet counterclockwise until it loosens and remove it, and then use the threaded hole to wind the faucet in a clockwise direction for about five or six turns. Pay attention to the force when wrapping to make it tightly fit the faucet. After completing this step, continue to use the wrench to re-tighten the faucet in a clockwise direction, and then turn on the switch to see if there is still a leaking faucet. If not! Congratulations, you have successfully repaired your leaking faucet. Oh.
第三种：水龙头接头磨损
Use pliers to loosen the cover nut of the faucet in a counterclockwise direction, and then tighten it clockwise to test whether there is still water leakage from the faucet. If there is still water leakage, it is recommended to replace the new u-shaped gasket directly, and then tighten the faucet clockwise. Under normal circumstances, there will be no more water leakage.
