With the improvement of people’s living requirements, more and more people choose toilets when choosing sanitary ware. According to the shape of the toilet, it can be divided into one-piece type, split type and wall-mounted type. Today I will talk to you about how to choose a split toilet and how to install a split toilet.
How to choose a split toilet
According to the appearance, toilets can be divided into split toilets, one-piece toilets and wall-hung toilets. The water tank of the split toilet is separated from the seat body, and this design takes up a lot of space. The one-piece toilet is a commonly used type in household nowadays, and it saves a certain amount of space compared with the split type. Wall-mounted toilets are generally chosen for those who have higher requirements on the aesthetics of the home or the toilet area is small. This kind of toilet has a higher grade and effectively saves space.
Recognize the material: choose the right toilet
Most of the toilets are made of pure ceramic products. Ceramic toilets are made of clay or other inorganic substances through kneading, molding, and high-temperature firing. In addition, there are many toilets on the market that are made of artificial marble (agate) or fiberglass.
FRP sanitary ware is made of thermosetting unsaturated polyester resin or epoxy resin as bonding material, glass fiber and fabric as reinforcing material, and is made by hand lay-up, spraying into models and compression molding. It has comfortable body feeling and high strength. , Small weight, water and heat resistance, chemical corrosion resistance, durable, convenient installation and transportation, simple maintenance and so on.
Marble uses unsaturated polyester resin as adhesive, stone powder and stone slag as filler, when the unsaturated polyester resin bonds the stone slag and stone powder evenly and firmly during the curing process, it has beautiful appearance, smooth surface, Small deformation, acid and alkali resistance, stain resistance and other characteristics.
Split toilet installation method
① Before installing the toilet, conduct a comprehensive inspection of the sewage pipe to see if there is mud, sand, waste paper and other sundries in the pipe. Level the ground when toileting.
② Determine the center of the sewage pipe and draw a cross center line.
③Turn over the toilet, determine the center on the sewage outlet of the toilet, and draw a cross center line, the center line should extend to the feet around the bottom of the toilet.
④If there is a screw on the bottom of the toilet, it is recommended not to use it. First, it will damage the waterproof layer, and second, it will crack the toilet if it is tightened.
⑤Install a special sealing ring on the sewage outlet of the toilet.
⑥ Align and match the cross lines on the toilet with the cross lines on the ground sewage outlet, install the toilet, and press the sealing ring tightly, and then put a circle of glass glue around the bottom of the toilet. left and right levels.
⑦ 安装或调试水箱附件。先检查自来水管道，用水冲洗管道3-5分钟，保证自来水管道的清洁；然后安装角阀和连接软管，然后将软管连接到已安装的水箱配件的进水阀门上并按下水源检查进水阀门的进水和密封是否正常，检查是否安装排水阀位置是否灵活，有无卡阻、泄漏，进水阀过滤装置有无泄漏及安装情况。
⑧ 马桶安装完毕后，待玻璃胶固化后，再与水一起使用。固化时间一般为24小时。
The above is the knowledge about how to choose the split toilet and the installation method of the split toilet. I hope it will be helpful to you.
