Our daily life is inseparable from the toilet. When doing home decoration, in addition to knowing the style and quality of the toilet, we should also be clear about the installation of the toilet, because it also determines how to install the toilet? What are the attentions to the toilet installation? What? Next, the editor will tell you. How to install the toilet?
1. Check the sewage pipes and ground leveling
在安装马桶前，应该对排污管道进行全面检查，看管道内是否有泥沙、废纸等杂物，同时检查马桶安装现场的地面是否平整。
2.确定污水管道中心
将马桶翻过来，将其放在马桶排水管的中心，并画一条十字中心线，该线应延伸到马桶底部的脚周围。
3. 固定马桶
将马桶上的十字线与地面排污口对准，水平安装马桶，用力压紧密封圈，安装好地脚螺丝及装饰帽。
4. Bottom seal
Finally, the bottom seal should be done well, and a special sealing ring should be installed on the toilet sewage outlet, or a circle of glass glue putty) or cement mortar should be placed around it, and the ratio of cement to sand is 1:3.
5. Water tank accessories
Run the water for 3-5 minutes to flush the pipeline to ensure the cleanliness of the water pipe, then install the angle valve and connecting hose, connect the hose to the water inlet valve of the installed water tank accessories and press the water source.
Precautions for toilet installation:
1. Before installing the toilet, you should first conduct a comprehensive inspection of the sewage pipes to see if there are mud, sand, waste paper and other sundries in the pipes. The ground should be leveled. Saw the drain port short, and make the drain port 2mm-5mm above the ground as much as possible if conditions permit.
2. When choosing a toilet, you should first determine the size of the toilet, that is, the distance between the drain and the wall. Usually, the standard distance is only 300 and 400 mm.
3. Then choose the style you like according to the size, pay attention to choose the water-saving type (3-6 liters), and order to see the model and origin. The current products are mixed, so it is very necessary to shop around.
4. Before installing the toilet, you should also determine whether the selected product accessories and instructions are complete. Read the instructions carefully to understand some product matters, and avoid cheating and cutting corners. This must be paid attention to.
5. The drain outlet requires the installer to handle it smoothly, apply glass glue to match the drain outlet evenly, whether the gap between the toilet and the wall is even, and whether the placement is correct and stable.
6、马桶就位后，要求不漏水、水位正确、冲水顺畅、开关灵活、盖板牢固。
7. Now the toilet is generally not installed with anchor screws, but the reserved hole on the toilet should be blocked with glass glue to prevent odor.
