The bathroom is the highlight of the decoration, and the toilet is the most critical product in the bathroom, so its purchase is particularly important. Today, I will talk to you about the characteristics of siphon toilets and how to identify the quality of siphon toilets.
What are the characteristics of a siphon toilet
1. As long as the calculation requirements are met, the number of rainwater buckets carried by a single system is not limited;
2. There are fewer buried pipes, and the workload of ground excavation is small, which effectively shortens the construction period;
3. The suspension pipe is in a horizontal state, without any slope, and the construction is convenient;
4. The diameter of the standpipe is small and the quantity is small, which is convenient for decoration;
5. The flow rate of the rainwater bucket is large, the air and water are separated, and the drainage speed is fast and the effect is good.
How to identify the quality of the siphon toilet
1. Gently touch the surface of the toilet with your hands. If there is no uneven feeling, and you feel that the glaze and body feel very delicate, it means that the quality of the toilet is relatively good. If it is a low-to-medium-grade toilet, the glaze and body on the surface will be relatively rough, the color will be dull, and small holes will be found under the illumination of the light.
2. The high-grade toilet has reached the requirement of full porcelain because of the high temperature during firing, so it will feel heavy in the hand. However, the firing temperature of low-end toilets is low and the firing time is short, so they do not meet the requirements of full porcelain.
3. The water absorption rate of the toilet fired at high temperature is very low, so it is not easy to absorb sewage and produce peculiar smell. And some low-end toilets have a high water absorption rate. When sewage is sucked in, it is easy to emit an unpleasant smell and it is difficult to clean. Over time, cracks and water leakage will also occur. When selecting, you can gently tap the toilet with your hands. If the knocking sound is hoarse and not crisp and loud, then such a toilet may have internal cracks, or the product is not cooked.
4. When choosing, you should also reach into the dirty mouth of the toilet with your hand to feel whether the inside is smooth. If it feels rough, it means that there is no glaze inside, and such a toilet is prone to leaks. The gasket of the toilet should be made of rubber or foamed plastic. Such a gasket has strong elasticity and good sealing performance.
5. Whether the design of the pipeline is scientific and reasonable has a great influence on the flushing effect of the toilet. In general, test flushing before buying a toilet. According to official standards, in the case of less than or equal to six liters of water, the toilet must be able to flush out at least five water-filled table tennis balls on average after three flushes.
6. Pay attention to measure the distance between the center of the nozzle and the wall: measure the vertical distance from the center of the nozzle of the sewage pipe used to install the toilet to the wall, and then “seat” the distance. The distance of 30 cm is the middle water, the distance of 20-25 cm is the back water, and the distance of more than 40 cm is the front water.
7. Pay attention to choose different drainage methods: the toilet pressing method can be divided into flush type, siphon flush type and siphon centrifugal vortex type, etc. The flushing type and siphon flushing type have a water injection volume of about 9 liters and have a strong sewage discharge capacity, but the noise is loud when flushing. The vortex type has a large water consumption of 13-15 liters at a time, but it has a good mute effect. Obviously, the drainage effect should be the most important functional index. The method of testing the drainage is to install the accessories in the water tank, fill it with water, put a piece of toilet paper in the toilet and drip a drop of ink, once discharged without leaving traces, it shows that the sewer is smooth and the quality of the toilet is good.
8. Tank accessories are the most important. Whether you can ensure normal flushing depends on the water tank accessories! Therefore, you can buy cheap washbasins, but you must not buy cheap toilets. There is also a small tip: It is recommended that men can sit on the toilet sample for a try, because the toilet for men should be longer, otherwise it will be very uncomfortable!
