There is a washbasin in the bathroom of every household, and the washbasin is used for washing, washing hands, cleaning small objects, etc. Do you know how to install the washbasin? During the installation of the washbasin, we must pay attention to the height, which is more convenient and comfortable to use. The following editor will introduce the installation method of the washbasin.
Washbasin installation method
1. Confirm the installation position of the washbasin: Before laying floor tiles and wall tiles, it is necessary to confirm the installation position of the washbasin. Since the installation of the bathroom cabinet requires drilling holes on the wall, water inlet holes and drainage holes are also required. , Once installed, the position generally cannot be moved, so confirming the installation position of the bathroom cabinet is a prerequisite before installation.
2. When purchasing a bathroom cabinet, confirm the shape and size of the bathroom cabinet according to the installation location: After the location of the bathroom cabinet is determined, the shape and size of the bathroom cabinet can only be determined according to the installation location.
3. Look for the pipeline diagram of the water pipe and the circuit diagram of the wire: when installing, use a pneumatic drill to drill holes on the wall, so it is very important to confirm the pipeline diagram and circuit diagram before installation. If you break the water pipe or wire circuit diagram, you must pry it Part of the wall tiles are opened, causing unnecessary losses. 4. Confirm the installation height of the bathroom cabinet: the standard installation height of the general bathroom cabinet is 80~2125px, which is calculated from the floor tile to the upper part of the wash basin. The specific installation height should be determined according to the height and usage habits of family members , but it is most suitable within the standard height range.
1. Wash basin products should be flat and free from cracks. The drain plug should have an overflow hole with a diameter of not less than 8mm.
2. When connecting the drain cock and the washing basin, the overflow hole of the drain cock should be aligned with the overflow hole of the washing basin as far as possible to ensure the unimpeded flow of the overflow part. After inlaying, the upper surface of the drain cock should be lower than the bottom of the washing basin.
3. The fixing bolts of the bracket can be galvanized open bolts or galvanized metal expansion bolts not less than 6mm. If the wall is porous bricks, it is strictly forbidden to use expansion bolts.
4. After the washing basin is connected to the drain pipe, it should be firm and dense, and easy to disassemble, and the connection should not be exposed. Silicone paste caulking should be applied to the contact between the sink and the wall.
5. If the drainage trap of the washing basin and the faucet are plated products, the coating must not be damaged during installation.
The above is the installation method of the washbasin introduced by the editor. In fact, the installation of the washbasin is very simple, and each step is clearly explained. I believe that even if you do it yourself, you can easily install it.
