首页资讯

Faucet repair method faucet repair complete book

Faucet repair method faucet repair complete book

2023-01-03 08:01:59

In daily life, it is inevitable that some faucets will leak or break, which requires maintenance of the faucets. It is best to find professional maintenance personnel directly, but it is necessary to pay for maintenance costs. Therefore, learn these practical maintenance skills, and you can fix the broken faucet by yourself, saving money and worry.

1 Faucet maintenance process

1. Determine the cause of faucet maintenance; 2. Prepare maintenance tools (screwdriver, adjustable wrench, waterproof tape, etc.); 3. Close the main water gate; 4. Repair or replace the faucet; 5. Reinstall; 6. Open the water gate test; 7. Clean up Call it a day.

2 Common problems and maintenance methods of faucets

1. The water from the faucet is forked or the water volume is reduced, and there are no air bubbles

Possible reasons: The filter of the bubbler is clogged with fouling or debris such as scale.

解决方法:拆下水龙头,清洗过滤器。

2. The water output of the shower is small, and the water output is forked

Possible reasons: the water pressure is too low or the shower head is blocked by debris or scale accumulation.

Solution: Remove the shower nozzle and take out the rubber gasket with filter screen at the shower inlet or clean the top spray of the shower for cleaning.

3. There is noise on the body when the faucet is tapped

Possible reasons: the water pressure is too high; the faucet handle is closed quickly; the hot and cold water pipes are not fixed properly; there are obstructions or scale in the water inlet pipe.

Solution: reduce the water supply pressure, avoid shutting down the faucet quickly, re-construct, clean the pipes, and check whether the water pipes and connecting objects (such as water purifiers, water heaters) are in poor contact.

4. The temperature adjustment is not easy and the water temperature often changes

Possible cause: The pressure difference between cold and hot water is too large, or the water heater takes too long to raise the water temperature.

Solution: Turn down the hot and cold triangular valves to balance the pressure and ensure that the water temperature of the water heater can keep up with the water outlet speed.