With the improvement of people’s living standards, the toilet is becoming more and more popular in modern families. The toilet is really relatively clean and sanitary to use in the toilet. Now there are smart toilet seats, which are also a great convenience for people’s life. But careless use will also cause problems, especially in the water tank and other more hidden places, a little attention will leave problems hidden dangers. Today, I will tell you about the water inlet valve of the toilet is broken, how to repair it. The first step of maintenance is to remove the water inlet valve. I don’t know how to remove the toilet water inlet valve. Let’s learn it together.
Toilet water inlet valve water stop principle
The water inlet valve of the toilet is in the tank, usually hidden up, its structure principle we also need to understand first.
When the water is released, you turn the knob. The knob will pull the water up through the lever, so that the water in the tank will be released. When the water is finished, the water plug will fall to block the outlet, and the float drops with the surface of the water. As it falls, the lever will pull the water up, allowing the water to enter the tank. Then as the water rises, when the water rises, the water plug is pressed down through the lever to block the water inlet, and the tank is filled with water at this time.
And when the intake pipe fails, the water in the tank will keep rising until it overflows the tank. The setting of the seepage pipe can solve this problem. When the water level in the tank rises to the mouth of the seepage pipe, the water will flow into the toilet through the mouth of the seepage pipe, and there is no need to worry about the overflow of water.
How to remove the toilet water valve
After knowing the principle of the water inlet valve, it is a matter of some steps to remove it
1. First remove the blue integral water inlet valve on the left.
2. Then take off the cap of the toilet fill valve.
3. Next, remove the part of the white connecting point above the inner aconite.
4, and then separate the two parts, remove the counterclockwise turn, it is recommended to use small pliers is easier. When you put it on, you rotate it clockwise, you press it a little bit and you put it on.
5. And the part that connects to the water pipe is key.
6, the following part can also be removed, not through the water is here, basically arranged above the position of the small lid can be repaired.
7, try water, lift the float ball, water stops, it is fixed.
Then the problem of how to dismantle the toilet water inlet valve is basically solved here. The removal of the toilet water inlet valve is still more complex. It is best to understand the internal structure of the toilet tank and its working principle before you repair it. Of course, like this complex problem, find professional maintenance personnel to carry out is the most convenient and simple.
