Almost every decorated family will have some regrets, or the design of the ill-considered, or the neglect of decoration and left a “sequelae”. Especially the bathroom, don’t look down on this place, if there is not a complete design, the decoration here will also make a mess. This function first, water, heat and electricity complete space in the home is more difficult, decoration design, sanitary ware selection, construction quality, which can not be vague. As long as a little attention will leave a “dead corner”, for the future use of added trouble. The “dead corners” here mainly include the following three aspects:
One: before purchase did not consider the installation, after purchase found neither beautiful, use is not convenient.
In recent years, consumers are more and more willing to spend money on sanitary ware decoration, and in addition to the construction, the follow-up investment is also very large, usually only the purchase of sanitary ware spending about 1/8 of the total decoration. Due to the variety of various bathroom products, the price from several hundred yuan to tens of thousands of yuan difference, consumers in the home improvement market, often cross-stitch eyes, buy home only to find that their own bathroom is not coordinated. For example, there are thousands of beautiful washbasins on the market, only to find out when you get home that they are too big. They take up some of the space for the toilet, so that the tissue box and the trash can cannot be put into place. As a result, every “convenient” is not convenient.
Experts remind: it is better for consumers to consider what kind of products to buy at the design stage. During construction, they can reserve space, transform pipes and create installation conditions according to the specific installation requirements and technical parameters of the selected products, so as to ensure the smooth completion of the decoration process and the normal installation and use of sanitary products.
Two: Before the start of construction, the construction side modification, hydropower road transformation no map to follow, leaving hidden dangers for the subsequent construction.
In general, decoration companies will draw decoration design drawings for the owners, including overall renderings, detailed construction drawings and water and electricity road reconstruction drawings. However, due to insufficient communication and thoughtfulness between some owners and designers in advance, they put forward suggestions for modification of the original design with the progress of construction. In this way, while the construction was being modified, there was no drawing to follow after the completion of hidden works such as hydropower road transformation, leaving hidden dangers for the subsequent construction. Mr. Zhang, the reader, modified the original design during the construction process. When he later installed the bathroom mirror and bath towel holder, he found that he had no way to start with the wall. He did not know which tile was hidden under the wire and pipe, so he only recalled it slowly with the repairmen and tried to avoid the buried line.
[Design needs complete bathroom decoration don’t let the dead corner leave regret] expert reminder: When the water and electricity roads in the bathroom need to be reformed, consumers should ask the designer for a circuit transformation diagram in advance. If there are changes in the construction process, consumers should also communicate with the designer to draw a transformation diagram, and then start the construction. It is better not to modify the construction side, so as to avoid the future wall construction, injury wire cause disaster.
Almost every decorated family will have some regrets, or the design of the ill-considered, or the neglect of decoration and left a “sequelae”. Especially the bathroom, don’t look down on this place, if there is not a complete design, the decoration here will also make a mess. This function is Paramount…
Third: The design is not elastic, a slight error in construction will cause a series of rework.
This situation is more common in the bathroom. If the socket on the wall is fixed, it is found that the height of the ceiling is in conflict with it, but at this time it has been plastered with tiles, which is difficult to change. For example, after the washbasin is installed in place, it is found that the pipeline cannot go through normally, so it has to turn a few corners to wear out from the bathroom cabinet.
Experts warn: consumers must consider whether the existing design and future construction is feasible and flexible before buying sanitary products. For example, the faucet needs to be embedded with appropriate water pipes, the bathroom cabinet needs to reserve enough installation space, the toilet needs to consider the wall distance, the shower room needs to consider the load-bearing wall, the floor drain position should be appropriate, etc. These conditions must be done in the construction of the home, otherwise the bathroom products can not be installed and used.
