Now the floor on the market is not only rich in style, brand emerge in endless succession, complete in variety, even the size of a variety of specifications, to the owner’s choice caused a lot of trouble, in the end what kind of specification of the floor decorative good? In order to facilitate everyone to choose, we will introduce the floor is a big board or a small board is good, come and see!
Whether the floor is big or small
1: Room size
If the size of the room is small, the wide wood floor will not be able to fit in more than a few pieces, of course, it will be less effective and more likely to waste resources. Therefore, for small apartments, narrow wood flooring is more suitable than wide wood flooring. Narrow wood floor color, pattern, effect and so on in the small apartment paved out will be better. Wide wood floors are more suitable for larger rooms.
2: Stability
In the southern city choose the floor should choose small board, the stability of the small board is better than that of the large board, on the contrary in the northern city choose the large board is better.
3: replacement
Once a large scratch or damage occurs to a board in use, it is easier to replace a small board than a large one. Because even if there is no suitable small board, it can be replaced with a large board machining (carpentry can do); But when the big board breaks, there’s no replacement board and it’s hard to find a replacement.
Solid wood floor selection method
1, observe the accuracy of the floor
After unpacking the wooden floor, take out about 10 pieces, assemble them by hand, observe the notch and bite of the floor, the assembly gap, and the height difference between the adjacent floors.
2, check the substrate defects
Observe the floor section to see whether the grain of the plate is chaotic; Check whether there are dead joints, live joints, cracking, decay, bacterial change and other defects. Because hardwood floors are natural wood products. Objectively there is color difference and uneven phenomenon, there is no need to pay too much attention to color difference.
3, MEASURING FLOOR’S MOISTURE CONTENT NATIONAL STANDARD STIPULATES MOISTURE CONTENT OF WOOD FLOOR IS 8% ~ 13%, in fact OUR COUNTRY REGION IS vast, MOISTURE content of different region REQUEST both different. General wood dealers should have moisture content tester, if not, it shows that the moisture content of the technical indicators do not pay attention to. At the time of purchase, first test the moisture content of wood flooring selected in the exhibition hall, and then test the moisture content of wood flooring of the same material and specifications that have not been unpacked. If the difference is +2%, it can be considered qualified.
4. Determine the appropriate length
It is recommended to choose a short and medium length floor, which is not easy to deform, easy to lay, and not afraid of damage during transportation. Floors that are too long and too wide are relatively easy to deform and can be troublesome to lay.
5. Check the defects of the substrate
First check whether it is the same tree species, whether it is mixed, whether the floor has dead joints, live joints, cracking, decay, bacteria and other defects. As for the color difference of the floor, because the wood floor is a natural wood product, there is an objective color difference and uneven pattern phenomenon, which is unavoidable. And laying solid wood flooring to feel the feeling of returning to nature, is in its natural color, pattern, if too much pursuit of the floor without color difference, is unreasonable, as long as the pavement slightly adjusted.
The above is the floor is good or small board good introduction, I hope to help you.
